|
The train is transferred from the train control vehicle to the isolation mode.
It is also known as welding long rail line, which is a kind of line that welded normal rails without rail seam. The welding rail is not less than 200 meters long, and the actual application is usually 800~1000 meters or more. The long track is laid in the specified temperature range and fixed on the pillow. The long rail ends with a rail joint, while the middle part cannot scale up and down with the temperature. Therefore, there will be a great temperature pressure in the middle of the rail during the summer, which will produce a great temperature tension in winter. The greatest pressure on the rail and tension according to the years of rail laying and the highest temperature and minimum temperature calculation, rail tracks the maximum pressure should not cause to drum up by maximum tension should not cause rail fracture
Transformers do not actually make conversion between mechanical and electrical form, but they transfer electric power from one circuit to another circuit. They can decrease or increase the voltage while transferring the power without changing the frequency, but with the corresponding increase or decrease in the current. Transformers also belong to electrical machines.
Car thieves tamper while using VIN number of a stolen vehicle to be able to sell its parts, license it within a new identity, or get the vehicle from the country. A VIN can be changed in several ways, but the most-commonly used methods include removing in the part in the car where the VIN is found and replacing it with a new part, grinding, or changing one or multiple numbers or letters of the VIN. That is why, when buying a used car, always look at the places where a VIN is generally located, to check out signs that indicate it has been tampered with.
Self-cleaning filter features: continuous water supply is carried out in the backflush, and the whole backwash is achieved in every point of the suction net filter. The anti-flushing is only a small local pressure change between the suction nozzle and the fine filter screen, while the movement of the collector and hydraulic cylinder does not affect the normal water supply. At the same time, the amount of water consumed during the backflush is very small, with the flow rate of 300m3/ h. For example, the reverse flushing flow rate is 35-40m3 / h, the anti-flushing time is 7-15 seconds, and the backwash amount is 80-160L
New Car Buying Tips--




Copyright ?1998-2017 Technews Corp, All rights reserved
|
